WB-25, 25" Sander, 15HP 3PH 230/460V with DRO
- Centralized controls allow you to access all the needed buttons on one simple panel
- The auto thicknesser will capture the piece of wood to give the user the exact starting thickness
- The variable speed feed belt allows you to accurately dial in the exact feed speed to best suit your project
- Digital readout will show the user the exact thickness of the finished piece, or will allow you to preset exactly the thickness you prefer for the finished piece
- The disc brake slows the machine quickly and will activate immediately to stop machine in an emergency
- The pneumatic sensor system controls the sanding belt oscillation to prevent the belt from running off the ends of the drums, as well as use the sanding surface more uniformly without leaving sanding lines on the workpiece
- The three motor system allows for maximum horsepower to independently power the sanding drums, the variable speed feed, and the feed table movement.
- Standard Equipment:
- 2 Sanding belts, 100 and 180 Grit
- Graphite platen
Feed Motor Power (HP) | 1 |
Sandling Belt Speed (FPM) | 2,625 |
Minimum Board Thickness (In.) | 1/8 |
Style (Type) | Wide Belt |
Motor Power (HP) | 15 |
Motor Phase | 3 |
Table Lift Motor Power | 1/4 |
Sanding Belt Size (In.) | 25 x 75 |
Table Height from Floor (In.) | 31-3/8 - 37-3/8 |
Maximum Board Thickness (In.) | 6 |
Maximum Board Width (In.) | 25 |
Prewired Voltage (V.) | 230 |
Dust Collection Minimum CFM Required (CFM) | 800 |
Recommended Circuit Size (Amps.) | 50/25 |
Wiring Remarks | 460V Requires Additional Parts |
Dust Port Outside Diameter (In.) | two @ 5 |
Air Required | yes |
Motor Voltage (V.) | 230/460 |
Minimim Board Length (In.) | 12 |
Feed Rate (FPM) | Variable from 15 to 49 |
There are no reviews yet
Manufacturer warranty | ||
5 Year | ||
Warranty details | ||
|