Double ended parting and grooving insert, 18.9mm long with a 3mm cutting width and 1.5mm corner radii, 7° front angle to reduce pip and burr on the right hand side, an accuracy according to tolerance class-M and chip-breaker CM, grade FM2150 PVD coated fine grained WC-Co carbide within ISO-grade ranges P25-P40 and K20-K40 for machining of steel and cast-iron in combination with PRAMET GF..(RL) 03, GG..(RL) 03 and XLCCN 0316 parting and grooving tools
- Product Name ISO: N123F2-0300-RM:FM2150
- Ordering Code ANSI: N123F2-0300-RM:FM2150
- EDP Number: RSD281175
- Coating: FM2150
- Material Application Priority Usage: P - Steel and cast steel (steels with alloy content = 10% and a hardness of < 45HRC)
| Product Measurement Standard | Metric |
| Insert Length (Mm.) | 18.9 |
| Cutting Width Upper Tolerance (Mm.) | .0008 |
| Cutting Width Lower Tolerance (Mm.) | -.0008 |
| Coating | FM2150 |
| Corner Radius (Mm.) | 1.5 |
There are no reviews yet
Customers who bought this item also bought
Turning Insert - Negative - DNMG 432-M:T9415
$13.12 excl tax
New
Insert TNMG 543RP MC6135
$30.54 excl tax
New
Shim LS-53 API
$26.61 excl tax
New
Insert C2I-F2N-0300-RM-0004-4425
$47.95 excl tax
End Mill - 1/8 x 1/2 x 1-1/2 4F Ball Nose XVaria4
$20.60 excl tax
End Mill - 1/2 x 1-1/4 x 3 4F XVaria4
$67.00 excl tax
Spade 1-7/8 #3 S-Cobalt SV-H
$73.67 excl tax
End Mill - 3/8 x 7/8 x 2-1/2 4F .015R XVaria4
$46.20 excl tax
End Mill - 1/2 x 1-1/4 x 3 4F .030R XVaria4
$63.80 excl tax
End Mill - 5/8 x 1-3/8 x 3-1/2 4F .030R XVaria4
$139.42 excl tax
End Mill - 1/4 x 3/4 x 2-1/2 4F .015R XVaria4
$29.70 excl tax
End Mill - 3/8 x 7/8 x 2-1/2 4F Ball Nose XVaria4
$50.14 excl tax
